Vodafone | O2 | Three | Eir 4G Voice And Data
WB Pro Dual Bands Booster 800/2600 4G is a complete 4G booster that is designed to improve signals for all Networks operating on the 800/2600mhz frequencies. It will effectively help increase and improve 4G calls clarity and speed up data uploads and downloads on the mobile phones and devices of up 55 users simultaneously. The WB 4G LTE 800/2600 is compatible with all Irish Networks.
Our WB Pro Booster 4G LTE 800/2600 is built with an extra signal strength out-put power of 60/65db and coverage capacity of about 500 Sqm2. The Pro booster is ideal for use in small offices, homes, small warehouses, etc.
Key Features:
- ALL 4G VOICE
- ALL 4G DATA
- UP TO 500 SQUARE METERS COVERAGE AREA
- UP TO 55 SIMULTANEOUS USERS
- MGC – DIGITALLY CONTROLLED IN 1DB STEPS
- ALC & AGC – 0 TO 30 DB
- UPGRADED GAIN LEVEL 60/65DB
- RSSI SIGNAL STRENGTH INDICATOR
- OSCILLATION ALARM SUPPORTS
- DURABLE INDUSTRIAL DESIGN
- HIDDEN MOUNTING BRACKET
- CE 0700 APPROVED LEGAL TO USE
- 15 DAYS MONEY BACK WARRANTY
- 3 YEARS GUARANTEE
Poor mobile phone signal inside buildings and around certain areas may be triggered by one of the following.
Some of these reasons range from the materials used during external construction like the fanciful double glazing glasses used as a design, the internal structures like insulation materials. The mountainous views and the densely tall trees that surround the area also are contributing factors to how minimal mobile phone signals can travel. But with our signal boosters, you are less likely to experience any of this, not even a drop call.
Setting Up Your Booster
With our Pro Dual bands, 4G booster like every other of our booster is quite easy to set up, it is basically a plug and play device. The package comes with a Signal Booster, Outdoor and Indoor antennas, 10 metres coax cable, a power supply and an easy to use instructions manual.
If you are in an extremely weak signal location, This is the right unit for you as it comes with the extra power of 60/65 dB gain. Firstly you will need to figure out a position in the roof where you can locate a good signal, it doesn’t have to be a full bar with our boosters 1-2 bars is enough for us to amplify and do the magic.
Once this location is figured out, position the Outdoor antenna if possible facing the general direction of the network mast. Do not point directly at this mast as it may cause interference and overload the booster.
Connect one end of the coax cable to the external antenna and the other end to the outdoor port of the booster. The position of the booster is entirely up to you we however recommend it should be secure inside the building with a minimum distance of 10 metre away from the outdoor antenna.
Once this is done, you then connect the indoor antenna to the mobile port on the Booster securely. Plug in the power supply cord and switch your booster on. You should begin to notice an increase in the bars on your mobile phone.
If you the result you get is not what you anticipated please do not hesitate to give us a call as we are here to help.
What’s Included In The Box
- 1 x WB GSM 800/2600MHz Mobile booster
- 1 x Outdoor Panel Antenna
- 1 x 10-meter Coaxial Cable
- 1 x AC/DC Power Supply
- 1 x Indoor Antenna
- 1 x Easy to work Installation Manual
Product Specifications
SKU | WBIE826P |
Gain | UL 29~60dB
DL 34~65dB |
Power | UL Max 20dBm
DL Max 19dBm |
Coverage | 500 m2 |
Frequency | 4G 800MHz: UL 832~862MHz DL 791~821MHz
4G 2600MHz: UL 2500~2570MHz DL 2620~2690MHz
|
Ripple in Band | ≦ 5dB |
Spurious Emission | ≦ -30dBm ~ -36dBm |
Max Noise Figure | ≦ 6dB |
Return Loss | ≦ 3dB |
Time Delay | ≦ 0.5μs |
MTBF | > 50000hours |
Power Supply | AC100~240V 50~60Hz / DC12V 2A (Included) |
Power Consumption | < 10 Watt |
Impendence | 50 Ω |
Connector | N-Female as standard |
Cooling | Heatsink convection cooling |
Dimensions (DxWxH) | 230x130x34mm |
Weight | 1200 Gram |
Environment Conditions | IP 40 |
Humidity | < 90% |
Operating Temperature | 10°C – 60°C |
Reviews
There are no reviews yet.